[BR_forum] MyEditBR Training

Discussion about software products provided for the BR community and created by its members. This includes (but is not limited to): MyEdit, File IO, Screen IO, FNSnap, and Utilities written in other languages for use with Business Rules.

Moderators: Susan Smith, admin, Gabriel

rmills

[BR_forum] MyEditBR Training

Postby rmills » Thu May 21, 2009 10:09 am

Hi,

There was some discussion before the Spring conference about my possibly
running some MyEditBR training.

I'm looking to see how many people are interested in participating in
this. So what I would like is for people to respond either to the forum
or to my email address letting me know if your interested in getting
MyEditBR specific training.

If you respond, please also try to mention in what areas of the editor you
would like to see more information.

MyEditBR is a very large program with lots of features. I've sure there
are areas and features of the application you might not even know existed
so if you can't think of anything that's fine.

All I'm looking for is numbers at the moment.

Thanks,

Ryan.


_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

GomezL
Posts: 231
Joined: Wed Apr 29, 2009 5:51 am
Contact:

[BR_forum] MyEditBR Training

Postby GomezL » Thu May 21, 2009 11:18 am

I would love to participate.

While I use MyEdit extensively, I really don't know how to use the advanced features, a "Practical Session" developing some code and the features used would be helpful.

I think that using the Debugger is also something that would be helpful. "Tips and Tricks" on how to use the debugger.

You do support "Regular Expressions", but I have no clue how to use them. I know you have RegexHelper. It would be great to have a session on using regular expressions. I suppose that searching is the overall topic.

The Selection Mode is a bit confusing, it would be nice to understand the purpose of each of the modes.


Luis I. Gomez
GomezL@CollectionSoftware.com
1-800-435-7257
Commercial Legal Software, Inc.
http://www.CollectionSoftware.com


-----Original Message-----
From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of rmills@mills-enterprise.ca
Sent: Thursday, May 21, 2009 12:09 PM
To: Business Rules Forum
Subject: [BR_forum] MyEditBR Training

Hi,

There was some discussion before the Spring conference about my possibly
running some MyEditBR training.

I'm looking to see how many people are interested in participating in
this. So what I would like is for people to respond either to the forum
or to my email address letting me know if your interested in getting
MyEditBR specific training.

If you respond, please also try to mention in what areas of the editor you
would like to see more information.

MyEditBR is a very large program with lots of features. I've sure there
are areas and features of the application you might not even know existed
so if you can't think of anything that's fine.

All I'm looking for is numbers at the moment.

Thanks,

Ryan.


_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

John
Posts: 507
Joined: Sun Apr 26, 2009 8:27 am
Location: West Orange, NJ
Contact:

[BR_forum] MyEditBR Training

Postby John » Thu May 21, 2009 11:31 am

I'm in. I barely use MyEditBR! with the exception of 1156 error resolution.
I'm probably unaware of most of the product.

Thanks,
-John Bowman

-----Original Message-----
From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of
Luis I. Gomez
Sent: Thursday, May 21, 2009 1:19 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training

I would love to participate.

While I use MyEdit extensively, I really don't know how to use the advanced
features, a "Practical Session" developing some code and the features used would
be helpful.

I think that using the Debugger is also something that would be helpful. "Tips
and Tricks" on how to use the debugger.

You do support "Regular Expressions", but I have no clue how to use them. I
know you have RegexHelper. It would be great to have a session on using regular
expressions. I suppose that searching is the overall topic.

The Selection Mode is a bit confusing, it would be nice to understand the
purpose of each of the modes.


Luis I. Gomez
GomezL@CollectionSoftware.com
1-800-435-7257
Commercial Legal Software, Inc.
http://www.CollectionSoftware.com


-----Original Message-----
From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of
rmills@mills-enterprise.ca
Sent: Thursday, May 21, 2009 12:09 PM
To: Business Rules Forum
Subject: [BR_forum] MyEditBR Training

Hi,

There was some discussion before the Spring conference about my possibly
running some MyEditBR training.

I'm looking to see how many people are interested in participating in
this. So what I would like is for people to respond either to the forum
or to my email address letting me know if your interested in getting
MyEditBR specific training.

If you respond, please also try to mention in what areas of the editor you
would like to see more information.

MyEditBR is a very large program with lots of features. I've sure there
are areas and features of the application you might not even know existed
so if you can't think of anything that's fine.

All I'm looking for is numbers at the moment.

Thanks,

Ryan.


_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net


_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net
John Bowman

Jon Shan

[BR_forum] MyEditBR Training

Postby Jon Shan » Thu May 21, 2009 1:37 pm

Dear Ryan,

I would be interested in MyEditBR training. Specifically, I'd like to learn about speeding up the development process using keyboard shortcuts.

Thanks,
Jonathan Shan

-----Original Message-----
From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of rmills@mills-enterprise.ca
Sent: Thursday, May 21, 2009 12:09 PM
To: Business Rules Forum
Subject: [BR_forum] MyEditBR Training

Hi,

There was some discussion before the Spring conference about my possibly
running some MyEditBR training.

I'm looking to see how many people are interested in participating in
this. So what I would like is for people to respond either to the forum
or to my email address letting me know if your interested in getting
MyEditBR specific training.

If you respond, please also try to mention in what areas of the editor you
would like to see more information.

MyEditBR is a very large program with lots of features. I've sure there
are areas and features of the application you might not even know existed
so if you can't think of anything that's fine.

All I'm looking for is numbers at the moment.

Thanks,

Ryan.


_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

Susan Smith
Posts: 654
Joined: Sun Aug 10, 2008 4:24 am
Location: Southern California

[BR_forum] MyEditBR Training

Postby Susan Smith » Thu May 21, 2009 3:21 pm

Hi Ryan,

I'd be interested, depending upon when or how you decide to set it up. Are you thinking of a GotoMeeting type of thing online? If so, I'm definitely in for that. Traveling isn't all that likely for me right now.

-- Susan

rmills@mills-enterprise.ca (rmills@mills-enterprise.ca) wrote:
Hi,

There was some discussion before the Spring conference about my possibly
running some MyEditBR training.

I'm looking to see how many people are interested in participating in
this. So what I would like is for people to respond either to the forum
or to my email address letting me know if your interested in getting
MyEditBR specific training.

If you respond, please also try to mention in what areas of the editor you
would like to see more information.

MyEditBR is a very large program with lots of features. I've sure there
are areas and features of the application you might not even know existed
so if you can't think of anything that's fine.

All I'm looking for is numbers at the moment.

Thanks,

Ryan.


_______________________________________________
BR_forum mailing list
BR_forum@ads.net (BR_forum@ads.net)
http://ads.net/mailman/listinfo/br_forum_ads.net


Stephen Koger

[BR_forum] MyEditBR Training

Postby Stephen Koger » Thu May 21, 2009 3:29 pm

Hi Ryan
Yes if this is going to be a GotoMeeting type training session. I believe we would be interested.

Steve
SEKESC


From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of Susan Smith
Sent: Thursday, May 21, 2009 4:22 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training


Hi Ryan,

I'd be interested, depending upon when or how you decide to set it up. Are you thinking of a GotoMeeting type of thing online? If so, I'm definitely in for that. Traveling isn't all that likely for me right now.

-- Susan

rmills@mills-enterprise.ca (rmills@mills-enterprise.ca) wrote:
Hi, There was some discussion before the Spring conference about my possiblyrunning some MyEditBR training. I'm looking to see how many people are interested in participating inthis.  So what I would like is for people to respond either to the forumor to my email address letting me know if your interested in gettingMyEditBR specific training.  
0
 
1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
There was some discussion before the Spring conference about my possibly
0
There was some discussion before the Spring conference about my possibly
1
There was some discussion before the Spring conference about my possibly
2
There was some discussion before the Spring conference about my possibly
3
There was some discussion before the Spring conference about my possibly
4
There was some discussion before the Spring conference about my possibly
5
There was some discussion before the Spring conference about my possibly
6
There was some discussion before the Spring conference about my possibly
7
There was some discussion before the Spring conference about my possibly
8
There was some discussion before the Spring conference about my possibly
9

Gabriel
Posts: 354
Joined: Sun Aug 10, 2008 7:37 am
Location: Arlington, TX
Contact:

[BR_forum] MyEditBR Training

Postby Gabriel » Fri May 22, 2009 9:34 am

I'd like to attend.
Gabriel


On Thu, May 21, 2009 at 4:29 PM, Stephen Koger <steve.koger@m-a-c-s.com (steve.koger@m-a-c-s.com)> wrote:

Hi Ryan
Yes if this is going to be a GotoMeeting type training session.  I believe we would be interested.
 
Steve
SEKESC
 

From: br_forum-bounces@ads.net (br_forum-bounces@ads.net) [mailto:br_forum-bounces@ads.net (br_forum-bounces@ads.net)] On Behalf Of Susan Smith
Sent: Thursday, May 21, 2009 4:22 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training



 
Hi Ryan,


I'd be interested, depending upon when or how you decide to set it up. Are you thinking of a GotoMeeting type of thing online? If so, I'm definitely in for that. Traveling isn't all that likely for me right now.

-- Susan

rmills@mills-enterprise.ca (rmills@mills-enterprise.ca) wrote:



Hi, There was some discussion before the Spring conference about my possiblyrunning some MyEditBR training. I'm looking to see how many people are interested in participating inthis.  So what I would like is for people to respond either to the forumor to my email address letting me know if your interested in gettingMyEditBR specific training.  
0
 
1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
There was some discussion before the Spring conference about my possibly
0
There was some discussion before the Spring conference about my possibly
1
There was some discussion before the Spring conference about my possibly
2
There was some discussion before the Spring conference about my possibly
3
There was some discussion before the Spring conference about my possibly
4
There was some discussion before the Spring conference about my possibly
5
There was some discussion before the Spring conference about my possibly
6
There was some discussion before the Spring conference about my possibly
7
There was some discussion before the Spring conference about my possibly
8
There was some discussion before the Spring conference about my possibly
9
 





_______________________________________________
BR_forum mailing list
BR_forum@ads.net (BR_forum@ads.net)
http://ads.net/mailman/listinfo/br_forum_ads.net


Mikhail Zheleznov

[BR_forum] MyEditBR Training

Postby Mikhail Zheleznov » Fri May 22, 2009 10:37 am

I'd like to attend.

I was very impressed by MyEditBR at the conference when it was demonstrated.

However, after coming back to Dallas, as I remember, I couldn't get certain things to work, so I stopped using it.

I'd like to get back to using it though.

Ryan, are you talking Webinar?

2009/5/22 Gabriel Bakker <gabriel.bakker@gmail.com (gabriel.bakker@gmail.com)>
I'd like to attend.
Gabriel



On Thu, May 21, 2009 at 4:29 PM, Stephen Koger <steve.koger@m-a-c-s.com (steve.koger@m-a-c-s.com)> wrote:

Hi Ryan
Yes if this is going to be a GotoMeeting type training session.  I believe we would be interested.
 
Steve
SEKESC
 

From: br_forum-bounces@ads.net (br_forum-bounces@ads.net) [mailto:br_forum-bounces@ads.net (br_forum-bounces@ads.net)] On Behalf Of Susan Smith
Sent: Thursday, May 21, 2009 4:22 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training



 
Hi Ryan,


I'd be interested, depending upon when or how you decide to set it up. Are you thinking of a GotoMeeting type of thing online? If so, I'm definitely in for that. Traveling isn't all that likely for me right now.

-- Susan

rmills@mills-enterprise.ca (rmills@mills-enterprise.ca) wrote:



Hi, There was some discussion before the Spring conference about my possiblyrunning some MyEditBR training. I'm looking to see how many people are interested in participating inthis.  So what I would like is for people to respond either to the forumor to my email address letting me know if your interested in gettingMyEditBR specific training.  
0
 
1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
There was some discussion before the Spring conference about my possibly
0
There was some discussion before the Spring conference about my possibly
1
There was some discussion before the Spring conference about my possibly
2
There was some discussion before the Spring conference about my possibly
3
There was some discussion before the Spring conference about my possibly
4
There was some discussion before the Spring conference about my possibly
5
There was some discussion before the Spring conference about my possibly
6
There was some discussion before the Spring conference about my possibly
7
There was some discussion before the Spring conference about my possibly
8
There was some discussion before the Spring conference about my possibly
9
 





_______________________________________________
BR_forum mailing list
BR_forum@ads.net (BR_forum@ads.net)
http://ads.net/mailman/listinfo/br_forum_ads.net






_______________________________________________
BR_forum mailing list
BR_forum@ads.net (BR_forum@ads.net)
http://ads.net/mailman/listinfo/br_forum_ads.net


Russ Seel

[BR_forum] MyEditBR Training

Postby Russ Seel » Fri May 22, 2009 11:00 am

Add me in. I looked at it in the last conference in 2008, but need to be considered a novice. Not using it now, but very interested in getting started. Can you address both novices and experienced users in the same webinar?
Russ Seel

From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of Mikhail Zheleznov
Sent: Friday, May 22, 2009 12:37 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training


I'd like to attend.

I was very impressed by MyEditBR at the conference when it was demonstrated.

However, after coming back to Dallas, as I remember, I couldn't get certain things to work, so I stopped using it.

I'd like to get back to using it though.

Ryan, are you talking Webinar?
2009/5/22 Gabriel Bakker <gabriel.bakker@gmail.com (gabriel.bakker@gmail.com)>
I'd like to attend.

Gabriel

On Thu, May 21, 2009 at 4:29 PM, Stephen Koger <steve.koger@m-a-c-s.com (steve.koger@m-a-c-s.com)> wrote:
Hi Ryan
Yes if this is going to be a GotoMeeting type training session. I believe we would be interested.

Steve
SEKESC


From: br_forum-bounces@ads.net (br_forum-bounces@ads.net) [mailto:br_forum-bounces@ads.net (br_forum-bounces@ads.net)] On Behalf Of Susan Smith
Sent: Thursday, May 21, 2009 4:22 PM
To: Business Rules Forum

Subject: Re: [BR_forum] MyEditBR Training



Hi Ryan,


I'd be interested, depending upon when or how you decide to set it up. Are you thinking of a GotoMeeting type of thing online? If so, I'm definitely in for that. Traveling isn't all that likely for me right now.

-- Susan

rmills@mills-enterprise.ca (rmills@mills-enterprise.ca) wrote:

Hi, There was some discussion before the Spring conference about my possiblyrunning some MyEditBR training. I'm looking to see how many people are interested in participating inthis.  So what I would like is for people to respond either to the forumor to my email address letting me know if your interested in gettingMyEditBR specific training.  
0
 
1
 
2
 
3
 
4
 
5
 
6
 
7
 
8
 
9
There was some discussion before the Spring conference about my possibly
0
There was some discussion before the Spring conference about my possibly
1
There was some discussion before the Spring conference about my possibly
2
There was some discussion before the Spring conference about my possibly
3
There was some discussion before the Spring conference about my possibly
4
There was some discussion before the Spring conference about my possibly
5
There was some discussion before the Spring conference about my possibly
6
There was some discussion before the Spring conference about my possibly
7
There was some discussion before the Spring conference about my possibly
8
There was some discussion before the Spring conference about my possibly
9
running some MyEditBR training.
0







_______________________________________________
BR_forum mailing list
BR_forum@ads.net (BR_forum@ads.net)
http://ads.net/mailman/listinfo/br_forum_ads.net





_______________________________________________
BR_forum mailing list
BR_forum@ads.net (BR_forum@ads.net)
http://ads.net/mailman/listinfo/br_forum_ads.net

rmills

[BR_forum] MyEditBR Training

Postby rmills » Fri May 22, 2009 11:03 am

At this point I have 7 confirmed, with a possible additional 1 (David are
you still wanting some training?)

As for the training I don't expect anyone, let alone myself, to fork out
money to travel for this. So, yes, I'm looking to use a webinar type of
training solution.

I'll announce something soon for everyone interested.

Thanks,
Ryan.




I'd like to attend.

I was very impressed by MyEditBR at the conference when it was
demonstrated.

However, after coming back to Dallas, as I remember, I couldn't get
certain
things to work, so I stopped using it.

I'd like to get back to using it though.

Ryan, are you talking Webinar?

2009/5/22 Gabriel Bakker <gabriel.bakker@gmail.com>

I'd like to attend.
Gabriel

On Thu, May 21, 2009 at 4:29 PM, Stephen Koger
<steve.koger@m-a-c-s.com>wrote:

Hi Ryan

Yes if this is going to be a GotoMeeting type training session. I
believe
we would be interested.



Steve

SEKESC


------------------------------

*From:* br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] *On
Behalf Of *Susan Smith
*Sent:* Thursday, May 21, 2009 4:22 PM
*To:* Business Rules Forum
*Subject:* Re: [BR_forum] MyEditBR Training



Hi Ryan,


I'd be interested, depending upon when or how you decide to set it up.
Are
you thinking of a GotoMeeting type of thing online? If so, I'm
definitely in
for that. Traveling isn't all that likely for me right now.

-- Susan

rmills@mills-enterprise.ca wrote:

Hi,



There was some discussion before the Spring conference about my
possibly

running some MyEditBR training.



I'm looking to see how many people are interested in participating in

this. So what I would like is for people to respond either to the
forum

or to my email address letting me know if your interested in getting

MyEditBR specific training.



If you respond, please also try to mention in what areas of the editor
you

would like to see more information.



MyEditBR is a very large program with lots of features. I've sure
there

are areas and features of the application you might not even know
existed

so if you can't think of anything that's fine.



All I'm looking for is numbers at the moment.



Thanks,



Ryan.





_______________________________________________

BR_forum mailing list

BR_forum@ads.net

http://ads.net/mailman/listinfo/br_forum_ads.net







_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net





_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

rmills

[BR_forum] MyEditBR Training

Postby rmills » Fri May 22, 2009 11:07 am

Noted.

I don't see why not. The initial idea for the training was to get the
most out of the editor itself. From there we can probably answer some
more in-depth questions or problems that people are having. Maybe the
advanced BR techniques should be a second session?

I've been adding more features to the BR debugger so maybe that should be
a second session.

Ryan.

Add me in. I looked at it in the last conference in 2008, but need to be
considered a novice. Not using it now, but very interested in getting
started. Can you address both novices and experienced users in the same
webinar?

Russ Seel



From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf
Of Mikhail Zheleznov
Sent: Friday, May 22, 2009 12:37 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training



I'd like to attend.

I was very impressed by MyEditBR at the conference when it was
demonstrated.

However, after coming back to Dallas, as I remember, I couldn't get
certain
things to work, so I stopped using it.

I'd like to get back to using it though.

Ryan, are you talking Webinar?

2009/5/22 Gabriel Bakker <gabriel.bakker@gmail.com>

I'd like to attend.

Gabriel

On Thu, May 21, 2009 at 4:29 PM, Stephen Koger <steve.koger@m-a-c-s.com>
wrote:

Hi Ryan

Yes if this is going to be a GotoMeeting type training session. I believe
we would be interested.



Steve

SEKESC



_____

From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf
Of Susan Smith
Sent: Thursday, May 21, 2009 4:22 PM
To: Business Rules Forum


Subject: Re: [BR_forum] MyEditBR Training



Hi Ryan,



I'd be interested, depending upon when or how you decide to set it up. Are
you thinking of a GotoMeeting type of thing online? If so, I'm definitely
in
for that. Traveling isn't all that likely for me right now.

-- Susan

rmills@mills-enterprise.ca wrote:

Hi,

There was some discussion before the Spring conference about my possibly
running some MyEditBR training.

I'm looking to see how many people are interested in participating in
this. So what I would like is for people to respond either to the forum
or to my email address letting me know if your interested in getting
MyEditBR specific training.

If you respond, please also try to mention in what areas of the editor you
would like to see more information.

MyEditBR is a very large program with lots of features. I've sure there
are areas and features of the application you might not even know existed
so if you can't think of anything that's fine.

All I'm looking for is numbers at the moment.

Thanks,

Ryan.



_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net






_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net




_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net




_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net





_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

Doug Meenen

[BR_forum] MyEditBR Training

Postby Doug Meenen » Fri May 22, 2009 11:08 am

I should be included as well.
I use MyEditBR now instead of version 2, but we can't do "edit" from the command line because of the substitution to our program folder.
SUBSTITUTE MACPRG,mapp2MACPRG prevents MyEditBr from firing from within BR.

We just save to source and load the wbs, brs manually for now.


Doug Meenen




--- On Fri, 5/22/09, rmills@mills-enterprise.ca <rmills@mills-enterprise.ca> wrote:
From: rmills@mills-enterprise.ca <rmills@mills-enterprise.ca>
Subject: Re: [BR_forum] MyEditBR Training
To: "Business Rules Forum" <br_forum@ads.net>
Date: Friday, May 22, 2009, 12:02 PM

At this point I have 7 confirmed, with a possible additional 1 (David are
you still wanting some training?)

As for the training I don't expect anyone, let alone myself, to fork out
money to travel for this. So, yes, I'm looking to use a webinar type of
training solution.

I'll announce something soon for everyone interested.

Thanks,
Ryan.




I'd like to attend.

I was very impressed by MyEditBR at the conference when it was
demonstrated.

However, after coming back to Dallas, as I remember, I couldn't get
certain
things to work, so I stopped using it.

I'd like to get back to using it though.

Ryan, are you talking Webinar?

2009/5/22 Gabriel Bakker <[url=/mc/compose?to=gabriel.bakker@gmail.com]gabriel.bakker@gmail.com[/url]>

I'd like to attend.
Gabriel

On Thu, May 21, 2009 at 4:29 PM, Stephen Koger
<[url=/mc/compose?to=steve.koger@m-a-c-s.com]steve.koger@m-a-c-s.com[/url]>wrote:

Hi Ryan

Yes if this is going to be a GotoMeeting type training session. I
believe
we would be interested.



Steve

SEKESC


------------------------------

*From:* br_forum-bounces@ads.net (br_forum-bounces@ads.net)] *On
Behalf Of *Susan Smith
*Sent:* Thursday, May 21, 2009 4:22 PM
*To:* Business Rules Forum
*Subject:* Re: [BR_forum] MyEditBR Training



Hi Ryan,


I'd be interested, depending upon when or how you decide to set it up.
Are
you thinking of a GotoMeeting type of thing online? If so, I'm
definitely in
for that. Traveling isn't all that likely for me right now.

-- Susan

[url=/mc/compose?to=rmills@mills-enterprise.ca]rmills@mills-enterprise.ca[/url] wrote:

Hi,



There was some discussion before the Spring conference about my
possibly

running some MyEditBR training.



I'm looking to see how many people are interested in participating in

this. So what I would like is for people to respond either to the
forum

or to my email address letting me know if your interested in getting

MyEditBR specific training.



If you respond, please also try to mention in what areas of the editor
you

would like to see more information.



MyEditBR is a very large program with lots of features. I've sure
there

are areas and features of the application you might not even know
existed

so if you can't think of anything that's fine.



All I'm looking for is numbers at the moment.



Thanks,



Ryan.





_______________________________________________

BR_forum mailing list

[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]

http://ads.net/mailman/listinfo/br_forum_ads.net







_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net





_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net


George Tisdale

[BR_forum] MyEditBR Training

Postby George Tisdale » Fri May 22, 2009 12:01 pm

I’d like in also. My concern is that I have a short attention span and would ask for limited duration and perhaps multiple segments of increasing complexity.

George L. Tisdale, CPA
Tisdale CPA
75 Junction Square Drive
Concord, MA 01742
(978) 369-5585
IRS Circular 230 Notice: "To ensure compliance with requirements imposed by the IRS, we inform you that any U.S. tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing or recommending to another party any transaction or matter addressed herein."
This electronic message transmission contains information which is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination or distribution of this communication to other than the intended recipient is strictly prohibited. If you have received this communication in error, please notify us immediately by calling (978) 369-5585 or by electronic mail (gtisdale@tisdalecpa.com) Thank you.

From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of Doug Meenen
Sent: Friday, May 22, 2009 1:08 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training


I should be included as well.
I use MyEditBR now instead of version 2, but we can't do "edit" from the command line because of the substitution to our program folder.
SUBSTITUTE MACPRG,mapp2MACPRG prevents MyEditBr from firing from within BR.

We just save to source and load the wbs, brs manually for now.


Doug Meenen



--- On Fri, 5/22/09, rmills@mills-enterprise.ca <rmills@mills-enterprise.ca> wrote:

From: rmills@mills-enterprise.ca <rmills@mills-enterprise.ca>
Subject: Re: [BR_forum] MyEditBR Training
To: "Business Rules Forum" <br_forum@ads.net>
Date: Friday, May 22, 2009, 12:02 PM
At this point I have 7 confirmed, with a possible additional 1 (David are
you still wanting some training?)

As for the training I don't expect anyone, let alone myself, to fork out
money to travel for this. So, yes, I'm looking to use a webinar type of
training solution.

I'll announce something soon for everyone interested.

Thanks,
Ryan.




I'd like to attend.

I was very impressed by MyEditBR at the conference when it was
demonstrated.

However, after coming back to Dallas, as I remember, I couldn't get
certain
things to work, so I stopped using it.

I'd like to get back to using it though.

Ryan, are you talking Webinar?

2009/5/22 Gabriel Bakker <[url=/mc/compose?to=gabriel.bakker@gmail.com]gabriel.bakker@gmail.com[/url]>

I'd like to attend.
Gabriel

On Thu, May 21, 2009 at 4:29 PM, Stephen Koger
<[url=/mc/compose?to=steve.koger@m-a-c-s.com]steve.koger@m-a-c-s.com[/url]>wrote:

Hi Ryan

Yes if this is going to be a GotoMeeting type training session. I
believe
we would be interested.



Steve

SEKESC


------------------------------

*From:* [url=/mc/compose?to=br_forum-bounces@ads.net]br_forum-bounces@ads.net[/url] [mailto:[url=/mc/compose?to=br_forum-bounces@ads.net]br_forum-bounces@ads.net[/url]] *On
Behalf Of *Susan Smith
*Sent:* Thursday, May 21, 2009 4:22 PM
*To:* Business Rules Forum
*Subject:* Re: [BR_forum] MyEditBR Training



Hi Ryan,


I'd be interested, depending upon when or how you decide to set it up.
Are
you thinking of a GotoMeeting type of thing online? If so, I'm
definitely in
for that. Traveling isn't all that likely for me right now.

-- Susan

[url=/mc/compose?to=rmills@mills-enterprise.ca]rmills@mills-enterprise.ca[/url] wrote:

Hi,



There was some discussion before the Spring conference about my
possibly

running some MyEditBR training.



I'm looking to see how many people are interested in participating in

this. So what I would like is for people to respond either to the
forum

or to my email address letting me know if your interested in getting

MyEditBR specific training.



If you respond, please also try to mention in what areas of the editor
you

would like to see more information.



MyEditBR is a very large program with lots of features. I've sure
there

are areas and features of the application you might not even know
existed

so if you can't think of anything that's fine.



All I'm looking for is numbers at the moment.



Thanks,



Ryan.





_______________________________________________

BR_forum mailing list

[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]

http://ads.net/mailman/listinfo/br_forum_ads.net







_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net





_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net

Larry

[BR_forum] MyEditBR Training

Postby Larry » Fri May 22, 2009 1:48 pm

I like George’s approach.

I have sat through the grid/list sessions and learned more each time. Until one sits down and start to implement, the lessons don’t really take hold.

Although I am using grids for data input, it is at the more rudimentary level. I am excited about what can be done, and I appreciate everyone’s patience at helping me implement the latest items.

I think the same approach for MyEditBr would be very beneficial.


From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of George Tisdale
Sent: Friday, May 22, 2009 2:04 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training


I’d like in also. My concern is that I have a short attention span and would ask for limited duration and perhaps multiple segments of increasing complexity.

George L. Tisdale, CPA
Tisdale CPA
75 Junction Square Drive
Concord, MA 01742
(978) 369-5585
IRS Circular 230 Notice: "To ensure compliance with requirements imposed by the IRS, we inform you that any U.S. tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing or recommending to another party any transaction or matter addressed herein."
This electronic message transmission contains information which is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination or distribution of this communication to other than the intended recipient is strictly prohibited. If you have received this communication in error, please notify us immediately by calling (978) 369-5585 or by electronic mail (gtisdale@tisdalecpa.com) Thank you.

From: br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] On Behalf Of Doug Meenen
Sent: Friday, May 22, 2009 1:08 PM
To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training


I should be included as well.
I use MyEditBR now instead of version 2, but we can't do "edit" from the command line because of the substitution to our program folder.
SUBSTITUTE MACPRG,mapp2MACPRG prevents MyEditBr from firing from within BR.

We just save to source and load the wbs, brs manually for now.
Doug Meenen



--- On Fri, 5/22/09, rmills@mills-enterprise.ca <rmills@mills-enterprise.ca> wrote:

From: rmills@mills-enterprise.ca <rmills@mills-enterprise.ca>
Subject: Re: [BR_forum] MyEditBR Training
To: "Business Rules Forum" <br_forum@ads.net>
Date: Friday, May 22, 2009, 12:02 PM
At this point I have 7 confirmed, with a possible additional 1 (David are
you still wanting some training?)

As for the training I don't expect anyone, let alone myself, to fork out
money to travel for this. So, yes, I'm looking to use a webinar type of
training solution.

I'll announce something soon for everyone interested.

Thanks,
Ryan.




I'd like to attend.

I was very impressed by MyEditBR at the conference when it was
demonstrated.

However, after coming back to Dallas, as I remember, I couldn't get
certain
things to work, so I stopped using it.

I'd like to get back to using it though.

Ryan, are you talking Webinar?

2009/5/22 Gabriel Bakker <[url=/mc/compose?to=gabriel.bakker@gmail.com]gabriel.bakker@gmail.com[/url]>

I'd like to attend.
Gabriel

On Thu, May 21, 2009 at 4:29 PM, Stephen Koger
<[url=/mc/compose?to=steve.koger@m-a-c-s.com]steve.koger@m-a-c-s.com[/url]>wrote:

Hi Ryan

Yes if this is going to be a GotoMeeting type training session. I
believe
we would be interested.



Steve

SEKESC


------------------------------

*From:* [url=/mc/compose?to=br_forum-bounces@ads.net]br_forum-bounces@ads.net[/url] [mailto:[url=/mc/compose?to=br_forum-bounces@ads.net]br_forum-bounces@ads.net[/url]] *On
Behalf Of *Susan Smith
*Sent:* Thursday, May 21, 2009 4:22 PM
*To:* Business Rules Forum
*Subject:* Re: [BR_forum] MyEditBR Training



Hi Ryan,


I'd be interested, depending upon when or how you decide to set it up.
Are
you thinking of a GotoMeeting type of thing online? If so, I'm
definitely in
for that. Traveling isn't all that likely for me right now.

-- Susan

[url=/mc/compose?to=rmills@mills-enterprise.ca]rmills@mills-enterprise.ca[/url] wrote:

Hi,



There was some discussion before the Spring conference about my
possibly

running some MyEditBR training.



I'm looking to see how many people are interested in participating in

this. So what I would like is for people to respond either to the
forum

or to my email address letting me know if your interested in getting

MyEditBR specific training.



If you respond, please also try to mention in what areas of the editor
you

would like to see more information.



MyEditBR is a very large program with lots of features. I've sure
there

are areas and features of the application you might not even know
existed

so if you can't think of anything that's fine.



All I'm looking for is numbers at the moment.



Thanks,



Ryan.





_______________________________________________

BR_forum mailing list

[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]

http://ads.net/mailman/listinfo/br_forum_ads.net







_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net





_______________________________________________
BR_forum mailing list
[url=/mc/compose?to=BR_forum@ads.net]BR_forum@ads.net[/url]
http://ads.net/mailman/listinfo/br_forum_ads.net

gordon
Posts: 297
Joined: Fri Apr 24, 2009 6:02 pm

[BR_forum] MyEditBR Training

Postby gordon » Fri May 22, 2009 1:55 pm

I'll be attending too. I consider myself to be in the amateur category with respect to MyEditBR.

I prefer more than one session of progressive sophistication as well.

Thanks.

gordon



On Fri, May 22, 2009 at 2:03 PM, George Tisdale <GTISDALE@tisdalecpa.com (GTISDALE@tisdalecpa.com)> wrote:

I’d like in also.  My concern is that I have a short attention span and would ask for limited duration and perhaps multiple segments of increasing complexity.
 
George L. Tisdale, CPA
Tisdale CPA
75 Junction Square Drive
Concord, MA  01742
(978) 369-5585
IRS Circular 230 Notice: "To ensure compliance with requirements imposed by the IRS, we inform you that any U.S. tax advice contained in this communication (including any attachments) is not intended or written to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing or recommending to another party any transaction or matter addressed herein."
This electronic message transmission contains information which is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination or distribution of this communication to other than the intended recipient is strictly prohibited. If you have received this communication in error, please notify us immediately by calling (978) 369-5585 or by electronic mail (gtisdale@tisdalecpa.com (gtisdale@tisdalecpa.com)) Thank you.
 
From: br_forum-bounces@ads.net (br_forum-bounces@ads.net) [mailto:br_forum-bounces@ads.net (br_forum-bounces@ads.net)] On Behalf Of Doug Meenen
Sent: Friday, May 22, 2009 1:08 PM

To: Business Rules Forum
Subject: Re: [BR_forum] MyEditBR Training




 
I should be included as well.
I use MyEditBR now instead of version 2, but we can't do "edit" from the command line because of the substitution to our program folder.
SUBSTITUTE MACPRG,mapp2MACPRG prevents MyEditBr from firing from within BR.

We just save to source and load the wbs, brs manually for now.


Doug Meenen



--- On Fri, 5/22/09, rmills@mills-enterprise.ca (rmills@mills-enterprise.ca) <rmills@mills-enterprise.ca (rmills@mills-enterprise.ca)> wrote:

From: rmills@mills-enterprise.ca (rmills@mills-enterprise.ca) <rmills@mills-enterprise.ca (rmills@mills-enterprise.ca)>
Subject: Re: [BR_forum] MyEditBR Training
To: "Business Rules Forum" <br_forum@ads.net (br_forum@ads.net)>
Date: Friday, May 22, 2009, 12:02 PM
At this point I have 7 confirmed, with a possible additional 1 (David are
you still wanting some training?)

As for the training I don't expect anyone, let alone myself, to fork out
money to travel for this.  So, yes, I'm looking to use a webinar type of
training solution.

I'll announce something soon for everyone interested.

Thanks,
Ryan.




I'd like to attend.

I was very impressed by MyEditBR at the conference when it was
demonstrated.

However, after coming back to Dallas, as I remember, I couldn't get
certain
things to work, so I stopped using it.

I'd like to get back to using it though.

Ryan, are you talking Webinar?

2009/5/22 Gabriel Bakker <gabriel.bakker@gmail.com>

I'd like to attend.
Gabriel

On Thu, May 21, 2009 at 4:29 PM, Stephen Koger
<steve.koger@m-a-c-s.com>wrote:

  Hi Ryan

Yes if this is going to be a GotoMeeting type training session.  I
believe
we would be interested.



Steve

SEKESC


   ------------------------------

*From:* br_forum-bounces@ads.net [mailto:br_forum-bounces@ads.net] *On
Behalf Of *Susan Smith
*Sent:* Thursday, May 21, 2009 4:22 PM
*To:* Business Rules Forum
*Subject:* Re: [BR_forum] MyEditBR Training



Hi Ryan,


I'd be interested, depending upon when or how you decide to set it up.
Are
you thinking of a GotoMeeting type of thing online? If so, I'm
definitely in
for that. Traveling isn't all that likely for me right now.

-- Susan

rmills@mills-enterprise.ca wrote:

  Hi,



There was some discussion before the Spring conference about my
possibly

running some MyEditBR training.



I'm looking to see how many people are interested in participating in

this.  So what I would like is for people to respond either to the
forum

or to my email address letting me know if your interested in getting

MyEditBR specific training.



If you respond, please also try to mention in what areas of the editor
you

would like to see more information.



MyEditBR is a very large program with lots of features.  I've sure
there

are areas and features of the application you might not even know
existed

so if you can't think of anything that's fine.



All I'm looking for is numbers at the moment.



Thanks,



Ryan.





_______________________________________________

BR_forum mailing list

BR_forum@ads.net

http://ads.net/mailman/listinfo/br_forum_ads.net







_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net



_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net





_______________________________________________
BR_forum mailing list
BR_forum@ads.net
http://ads.net/mailman/listinfo/br_forum_ads.net

 




_______________________________________________
BR_forum mailing list
BR_forum@ads.net (BR_forum@ads.net)
http://ads.net/mailman/listinfo/br_forum_ads.net



Return to “3rd Party Software from the BR Community”

Who is online

Users browsing this forum: No registered users and 1 guest

cron